Recent Entries

  • Test the Data of The Crate Mould As A Reference

      All sample inspection records were kept during the test, including various pressures during the processing cycle, melt and Crate Mould(FURNITUREMOULD) temperature, tube temperature, injection time, screw feed cycle, and the like. In short, all future contributions should be retained. Data wa...
  • How to Make Crates Mould With Long Life

      First of all, good Crate Mould(FURNITUREMOULD) design and structure. A qualified crate mould must have a perfect mould structure before starting the project. So we spent a lot of time analyzing mould structure and mould design, including demoulding draft angle, product surface microcosm, gat...
  • Pay Attention to Several Aspects When Repairing Daily Necessiti

      In the Daily Necessities Mould(FURNITUREMOULD) repair, we must pay attention to some things, because the die-casting mould belongs to a special precision machine is very expensive, so no more failures can occur during the maintenance process. When cleaning the mould metal and dirt, it appea...
  • Daily Necessities Mould Need to Be Effectively Maintained

      If the Daily Necessities Mould(FURNITUREMOULD) is damaged due to lack of effective mould protection, we will give you the following suggestions: 1. When disassembling the daily necessities mould, avoid bruising and wetting, and move smoothly. 2. Spray hot mould, then spray a small amount o...
  • Key Points for Crate Mould Gate Design

      The design of the gate is related to the size of the plastic part, the shape and the mould structure of the Crate Mould(FURNITUREMOULD), the conditions of the injection moulding process and the performance of the plastic part. However, in terms of basic functions, the gate portion should be ...
  • The Effect of Drag And Friction on The Dustbin Mould

      When plastic flows through different parts of the injection moulding machine and the Dustbin Mould(FURNITUREMOULD), the pressure loss on the leading edge of the plastic flow due to the effects of drag and friction. In addition, when the plastic contacts the mould wall, it begins to cool, inc...
  • The Reason Why The Dustbin Mould Leads to The Uneven Colour of

      The main reasons and solutions for the uneven colour of the injection moulding products caused by the Dustbin Mould(FURNITUREMOULD) are as follows: (1) The colourant diffuses poorly, which often causes the pattern to appear near the gate. (2) The thermal stability of plastic or colourant i...
  • The Daily Necessities Mould Pop-up Board Provides The Greatest

      The Daily Necessities Mould(FURNITUREMOULD) includes a pop-up plate that provides maximum assistance for a pair of moulded parts during ejection. In this case, it will be very important to provide uniform, total assistance for the undercut around the injection moulding when the injection occ...
  • Heating Is Very Important for The Success of Everyday Daily Nec

      Accurate heating of the hot runner manifold system is very important, which is very important for the success of plastic injection Daily Necessities Mould(FURNITUREMOULD) in manufacturing. There must be a good heat transfer associated with the hot coil and an area to maintain heating or the ...
  • Choose The Dustbin Mould According to Your Needs

      Molding is a procedure by which we can simply place any compound and liquid material and change it into a shape. After the emergence of plastics in this industry, it is the leader in the most flexible accessible projects. Plastics include highlights and we use them extensively in different f...
  • Deep Drawing Is Also Very Difficult for The Dustbin Mould

      Deep drawing is also very difficult when machining on parts such as Dustbin Mould(FURNITUREMOULD). In addition, processing such a large formwork will result in up to half of the original billet being processed, making it an uneconomical process. To overcome this problem, the dustbin mould wi...
  • The Degree of Maintenance of The Dustbin Mould Is Determined by

      1. Material: Aluminum or soft tools wear out in a shorter period of time than tools made from traditional tool steel. Dustbin Mould(FURNITUREMOULD) made of hardened steel last longer than conventional die steel moulds. 2. Complexity: Dustbin moulds with complex mechanisms or parts that requ...
  • Furniture Mould Design Point of View

      From the point of view of the Furniture Mould(FURNITUREMOULD) design, the moulding comprising the bosses should have an ejector pin or sleeve joined at the base of each boss in the cavity for ease of extraction. This also allows air to escape, thereby avoiding burn marks on the surface and i...
  • Make A Simple Circular Hole for The Furniture Mould

      For the processing of Furniture Mould(FURNITUREMOULD), it is best to make a simple circular hole, try not to make holes with complex shapes. The diameter of the hole should not be too small. The hole depth and the aperture ratio should not be too large, but the furniture mould core is thin a...
  • Make Sure The Furniture Remains in The Correct Part of The Furn

      In order to ensure that the furniture remains in the correct part of the Furniture Mould(FURNITUREMOULD) before spraying, it is essential to correctly select the draft angle of the inner and outer surfaces. For example, if the moulded part remains on the core, the draft angle on the cavity s...
  • How to Carry Out Furniture Mould Repair

      In the research of skilled Furniture Mould(FURNITUREMOULD) maintenance services, from the design stage, many important factors can be completed to inspect the creation process of the furniture mould in detail, so that more maintenance work can be achieved. Throughout the manufacturing proces...
  • Reduce The Available Pressure And Feed And Cause Damage to The

      A broken or ineffective backflow shutoff valve can cause damage to the Dustbin Mould(FURNITUREMOULD) by reducing the available pressure and feed. Adjusting the feed for compensation will not give a complete answer, as leakage along the screw will reduce the effective fill rate and will resul...
  • Faster Filling of The Dustbin Mould

      When the material enters and flows through the Dustbin Mould(FURNITUREMOULD) channel, back pressure is also established in the mold by solidification of the material. It should be reiterated that if the gap between the mold walls will be reduced by more than 50% during filling, it is highly ...
  • Control The Temperature of The Dustbin Mould

      The first material entering the Dustbin Mould(FURNITUREMOULD) is subjected to very little pressure as it flows into the dustbin mold channel, but as it advances toward the end of the dustbin mould, it gradually cools. The following materials are hotter, starting to pressurize the already exi...
  • Reduce Damage to The Dustbin Mould

      If possible, the Dustbin Mould(FURNITUREMOULD) should be stored in a cool, dry place to minimize rust conditions. Repairing dustbin mould damage ranges from a simple process to great difficulty, depending on the extent and type of damage. In some cases, repairs may only require replacement o...
  • Table Mould Heat Treatment Problem

      Table Mould(FURNITUREMOULD) heat treatment is an important means to improve the hardness of steel. Usually, after the mold is opened, heat treatment is carried out and then refined, but the process is also risky. If improper treatment will cause cracks in steel and scrap, what is the cause o...
  • Very Low Temperatures in The Dustbin Mould Can Cause Surface De

      Even when the melt enters the Dustbin Mould(FURNITUREMOULD), the injection speed is constant and its flow rate changes. The melt flow rate is high when entering the gutter box gate area, but the melt flow rate begins to decrease after entering the mold cavity, ie, the dustbin mould filling s...
  • What Is The Rationality of Furniture Mould

      If a worker wants to make a successful piece of furniture, he must first hone his Furniture Mould(FURNITUREMOULD). The layout of the furniture mould process is particularly important, and a reasonable process layout can speed up the production cycle, shorten the processing time, and effectiv...